How to install the Bari toilet paper holder without drilling: step-by-step adhesive kit

You've finished remodeling the bathroom, you've chosen the tiles well, and the last thing you want is to start drilling before you're clear on where each piece goes. Or you simply rent and prefer not to leave holes that you'll then have to justify. If the Bari toilet roll holder has convinced you with its dual function (toilet paper plus a small shelf for your phone or keys), the good news is that there's a real way to install it without drilling. The condition is that it must be size S or M, and in this article, we explain exactly why, and how to do it right the first time. If you were looking for a real no-drill bathroom toilet roll holder, and not a generic promise, this is the specific combination that works.

Why the Bari adhesive kit exists for S and M, but not for L

The Bari toilet roll holder comes in three sizes: S (14 cm), M (23 cm), and L (37 cm). The BARI S/M adhesive kit is specifically designed for the two more compact versions, and there is no variant for L. It's not an oversight or a catalog limitation; it's a design decision with a mechanical reason behind it.

The longer the piece, the more leverage any weight resting on the end of the shelf, such as a phone or a bunch of keys, generates. A double-sided adhesive tape, no matter how good, has a limit to its contact surface and resistance to that type of lateral force. In S and M, this leverage remains within a safe range for the adhesive. In L, with a 37 cm arm, the same weight exerts much more force on the anchor point, and an adhesive system is no longer reliable in the long term. That's why Kaimok Design only offers the kit for S and M, and recommends screw installation for the L version without exception.

If your priority is not to drill, the practical decision is simple: choose S if you only need a small support point, or M if you want more surface for your phone and keys without sacrificing adhesive installation. If you need the L version for space or capacity, you must assume it will be installed with anchors and screws.

What you need before you start

In addition to the Bari toilet roll holder in S or M and the adhesive kit, it's advisable to have on hand an oil- and silicone-free surface cleaner, a clean cloth, a level (or your phone's level), and a pencil to mark the position. The kit includes double-sided tape and screw hole covers matching the finish, in case you decide to switch to mechanical installation at some point without the change being noticeable.

Before opening the kit, confirm three things: the size (S or M, never L with this system), the color (black, beige, or white, to match the rest of the bathroom accessories), and the side (right or left), which depends on the position of the toilet and which side is most comfortable for you to pull the paper from. Changing sides after installation means removing it and preparing the surface from scratch again, so it's worth deciding calmly before sticking anything.

Prepare the wall so the adhesive holds

The difference between an adhesive installation that lasts for years and one that comes off after a few months is almost always in this step, not in the quality of the product. Before sticking the Bari:

• Clean the surface thoroughly. Soap, lime, or grease residues greatly reduce the tape's grip, even if the tile looks clean to the naked eye. A cloth with water and neutral soap, well rinsed, is safer than a multi-purpose cleaner with additives.
• Allow to dry completely. Residual moisture, very common in a recently used bathroom, is the most common cause of an adhesive installation failing prematurely. Wait until the surface is completely dry to the touch.
• Check that the tile is smooth. The smoother and more uniform the surface, the greater the real contact the tape has and the more reliable the fastening. A tile with marked relief or texture reduces the effective contact surface.
• Avoid areas near recently applied silicone joints. Silicone continues to release volatile compounds for days after application, and this can interfere with the tape's grip in the nearby area.

Step-by-step installation

1. Mark the position with a pencil, checking the height and ensuring it is level before touching the adhesive.
2. Clean the marked area with the cloth and oil-free cleaner, and let it dry completely.
3. Remove the tape protector from the adhesive kit, taking care not to touch the adhesive surface with your fingers.
4. Place the Bari in the marked position and press firmly over the entire contact surface for at least 30 seconds, so that the tape makes uniform contact and not just at the ends.
5. Do not apply weight yet. Maximum adhesion is not achieved instantly. Allow several hours, ideally overnight, before placing the toilet paper roll or resting anything on the shelf.

If at any time you decide to switch to screw installation (for example, if you change to an L version or simply prefer mechanical fastening), carefully remove the tape, clean the remaining adhesive from the wall, and use the included covers in the kit to cover the screw holes if you return to an adhesive installation later at another point.

How high to place the Bari toilet roll holder

There is no single correct height; it depends on the position of the toilet in your bathroom. As a practical reference, between 60 and 70 cm from the floor is usually comfortable for reaching the paper without having to turn too much, and at a horizontal distance of between 15 and 25 cm from the edge of the toilet. If the Bari is going to share a wall with other pieces, such as the Torino towel rail, it is advisable to plan both positions before sticking anything, so that the ensemble is visually aligned and not each piece at its own height unrelated to the other.

A simple trick before firmly fixing it: hold the Bari in the position you think is correct for a few seconds and simulate the gesture of taking paper. This is more reliable than just measuring with a tape measure, because the height that seems correct on paper is not always the most comfortable in daily use.

How much weight does the integrated shelf hold?

The adhesive system in S and M is designed for the actual weight of normal domestic use: the toilet paper roll and, on the shelf, a mobile phone, keys, or similar small objects. It is not designed for sustained heavy objects or for frequently supporting things much beyond that. If your intention is to use the shelf for more than light and occasional objects, screw installation, available in all three sizes including L, remains the most reliable long-term option.

Common mistakes when installing the Bari adhesive kit

Choosing the L version thinking it also comes with an adhesive kit. This is the most common mistake. The BARI S/M kit is not compatible with L, and there is no adhesive alternative for that size for the mechanical reason explained at the beginning.

Installing it on a surface cleaned with products containing oils or silicones. Some bathroom cleaners leave an invisible residue that greatly reduces the tape's grip, even if the surface appears impeccable.

Applying weight too soon. Hanging the toilet paper roll immediately after installation, before the tape reaches its maximum adhesion, is the most common cause of it coming off in the first few days.

Not calmly deciding on the side (right or left) before sticking. Changing it afterwards means peeling it off, cleaning the remaining adhesive, and preparing the surface from scratch again, so it's worth thinking it through the first time.

Frequently Asked Questions

Can the Bari toilet roll holder be installed without drilling?

Yes, in the S and M versions, by combining it with the BARI S/M adhesive kit. The L version is only installed with screws.

Why doesn't the L version of the Bari have an adhesive kit?

For a mechanical reason: being longer, any weight resting on the end of the shelf generates more leverage on the anchor point, more than an adhesive system can reliably support in the long term.

Is there a truly no-drill toilet paper holder?

Yes, the Bari in S or M with its adhesive kit is a real solution, not a generic promise. The key is surface preparation: clean, dry, and without marked texture.

How high should the Bari toilet roll holder be placed?

Between 60 and 70 cm from the floor, about 15 to 25 cm from the edge of the toilet, adjusting according to what is most comfortable for reaching the paper in your specific bathroom.

How long should I wait before using the toilet roll holder after installing it?

Ideally, wait several hours, or overnight, before placing the toilet paper roll or resting anything on the shelf, so that the tape reaches its maximum adhesion.

Can I switch from adhesive installation to screw installation later?

Yes. The kit includes covers for the screw holes, designed for the opposite case, but if you want to switch from adhesive to mechanical, simply remove the tape, clean the remaining adhesive from the wall, and install with anchors and screws as with any other item in the catalog.

The Bari toilet roll holder in S or M, properly installed with its adhesive kit, solves the same problem as a screw installation, without leaving a single hole to repair afterwards. If your bathroom needs more than this hanging point, check our guide on what you can truly hang without holes to see the rest of Kaimok's pieces designed for adhesive installation.

Discover the complete collection of Kaimok bathroom accessories.

Kreate your Komfort.